PL
EN

Peer Review process

  • Each manuscript is assigned an individual number that is used in all correspondence regarding the publication process.
  • Each submission is initially screened by Editor-in-Chief for its novelty and correspondence to the journal scope. Manuscripts that don’t suit the journal scope or lacking in originality may be declined by Editor-in-Chief and returned to the authors without review.
  • The journal uses a double-blinded peer review system. Editor-in-Chief appoints a minimum of 2 Reviewers from institutions other than the authors affiliation and handles the review process. In case of Polish submissions at least one referee is selected from abroad. Authors are requested to suggest potential Reviewers of their manuscript. However, final selection of Reviewers is made exclusively by Editor-in-Chief.
  • The Reviewer submits the evaluation sheet to the Editorial System at https://www.editorialsystem.com/aot/ with a statement proposing either paper rejection or paper acceptance with one of the following options:
    • in the form as submitted,
    • after minor review agreed with the editor,
    • after essential improvements agreed with the reviewer.
  • Following the receipt of the reviews containing a unanimous conclusion with respect to the paper acceptance or rejection the Editor-in-Chief takes up a decision about the paper acceptance or rejection. The Editorial Office releases to Authors part of the review justifying the decision about publication, without information about the Reviewers.
  • The Editorial Office asks Authors of the contribution to introduce relevant correction and enhancements suggested by Reviewers and/or Editorial Office. Based on the obtained recommendations from Reviewers and response of Authors, Editor-in-Chief makes an ultimate decision about acceptance of the manuscript or its rejection for publication.
  • Editor-in-Chief may appoint an Editor with expertise in the relevant field, who is fully responsible for further handling the paper and giving an ultimate decision about its acceptance or rejection.
  • The review process should not exceed the period of 3 months.
  • Once a year the Editorial Office places on the journal website an up-to-date list of collaborating Reviewers.

Review Form

Review Board 2015-2018

Archives of Thermodynamics relies upon the expert assessment to maintain the high publication standards. All submitted manuscripts have been reviewed by at least two reviewers to  ensuring the quality and relevance of the published papers.

We appreciate their time and efforts in evaluating manuscripts as well as assistance with the improvement of recommend ones, and express our sincere thanks for their completely voluntary and uncompensated work.

Combined List of Reviewers:

Prof. Jan Awrejcewicz, Lodz University of Technology
Prof. JanuszBadur, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Krzystof Badyda, Warsaw University of Technology
Prof. Jerzy Banaszek, Warsaw University of Technology
Prof. Ryszard Białecki, Silesian University of Technology, Gliwice
Prof. Bogumił Bieniasz, Rzeszow University of Technology
Prof. Zbigniew Bis, Czestochowa University of Technology
Prof. Leon Bogusławski, Poznan University of Technology
Prof. Tadeusz Bohdal, Koszalin University of Technology
Prof. Dariusz Butrymowicz, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Adam Cenian, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Tadeusz Chmielniak, Silesian University of Technology, Gliwice
Prof. Maciej Chorowski, Wrocław University of Technology
Prof. Dorota Chwieduk, Warsaw University of Technology
Prof. Michał Ciałkowski, Poznan University of Technology
Prof. Janusz Cieśliński, Gdańsk University of Technology
Prof. Marian Czapp, Koszalin University of Technology
Prof. Tomasz  Dobski, Poznan University of Technology
Prof. Piotr Doeffer, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Roman Domański, Warsaw University of Technology
Prof. Krzysztof Dutkowski, Koszalin University of Technology
Prof. Marek Dzida, Gdańsk University of Technology
Prof. Tadeusz Ryszard Fodemski, Łódź University of Technology
Prof. Piotr Furmański, Warsaw University of Technology
Prof. Władysław Gajewski, Czestochowa University of Technology
Prof. Zbigniew Gnutek, Wrocław University of Technology
Prof. Jan Górski, Rzeszow University of Technology
Prof. Dariusz Kardaś, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Marian Kazimierkowski, Warsaw University of Technology, Warsaw
Prof. Ewa Klugmann-Radziemska, Gdańsk University of Technology
Prof. Agnieszka Kijo-Kleczkowska, Czestochowa University of Technology
Prof. Zygmunt Kolenda, AGH University of Technology, Cracow
Prof. Piotr Koniorczyk, Military Technical University, Warsaw
Prof. Włodzimierz Kordylewski, Wrocław University of Technology
Prof. Krzysztof Kosowski, Gdańsk University of Technology
Prof. Henryk Kudela, Wrocław University of Technology
Prof. Piotr Lampart , The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
PhD. Eng. Marcin Lemański , Gdańsk
Prof. Janusz Lewandowski, Warsaw University of Technology
Prof. Witold Lewandowski, Gdańsk University of Technology
Prof. Jan Łach, Kazimierz Pulaski University of Technology and Humanities  in Radom
Prof. Henryk Łukowicz, Silesian University of Technology, Gliwice
Prof. Mikielewicz Dariusz, Gdańsk University of Technology
Prof. Mikielewicz Jarosław, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Jarosław Milewski, Warsaw University of Technology
Prof. Andrzej Miller, Warsaw University of Technology
Prof. Romuald Mosdorf, Bialystok University of Technology
Prof. Andrzej J. Nowak, Silesian University of Technology, Gliwice
Prof. Włodzimierz Nowak, Polish Academy of Sciences, Warsaw
Prof. Czesław Oleśkowicz-Popiel, Poznan University of Technology
Prof. Andrzej Panas, Military University of Technology, Warsaw
Prof. Piętak Andrzej, University of Warmia and Mazury in Olsztyn
Prof. Mieczysław Poniewski, Warsaw University of Technology
Prof. Jacek Pozorski, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Marek Pronobis, Silesian University of Technology, Gliwice
Prof. Romuald Puzyrewski, Gdańsk University of Technology
Prof. Andrzej Reński, Gdańsk University of Technology
Prof. Kazimierz Rup, Cracow University of Technology
Prof. Artur Rusowicz, Warsaw University of Technology
Prof. Robert Sekret, Czestochowa University of  Technology
Prof. Stanisław Sieniutycz, Warsaw University of Technology
Prof. Teodor Skiepko, Bialystok University of Technology
Prof. Jan Składzień, Silesian University of Technology, Gliwice
Prof. Janusz Skorek, Silesian University of Technology, Gliwice
Prof. Aleksander A. Stachel, West Pomeranian University of Technology, Szczecin
Prof. Wojciech Stanek, Silesian University of Technology, Gliwice
Prof. Jan Stąsiek, Gdańsk University of Technology
Prof. Jan Szargut, Silesian University of Technology
PhD. Eng. Szwaba Ryszard, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Marek Ściążko, AGH University of Technology, Cracow
Prof. Dawid Taler, Cracow University of Technology
Prof. Jan Taler, Cracow University of Technology
Prof. Andrzej Teodorczyk, Warsaw University of Technology
Prof. Marian Trela, The Szewalski Institute of Fluid-Flow Machinery PAS, Gdańsk
Prof. Janusz Terpiłowski, Military University of Technology, Warsaw
Prof. Roman Ulbrich, Opole University of Technology
Prof. Edward Walicki, University of  Zielona Góra
Prof. Krzysztof Warmuziński, The Institute of Chemical Engineering PAS in Gliwice
Prof. Andrzej Marek Wawrzynek, Silesian University of Technology, Gliwice
Prof. Tomasz Wiśniewski, Warsaw University of Technology
Prof. Stanisław Witczak, Opole University of Technology
Prof. Tadeusz Michał Wójcik, AGH University of Technology, Cracow
Prof. Kazimierz Wójs, Wrocław University of Technology
Prof. Włodzimierz Wróblewski, Silesian University of Technology
Prof. Zapałowicz Zbigniew, West Pomeranian University of Technology, Szczecin
Prof. Andrzej Ziębik, Silesian University of Technology
Prof. Janusz Zmywaczyk, Military Technical University, Warsaw

DO GÓRY