PL
EN
  1. Design and performance study of a small-scale waste heat recovery turbine
    R. Rusanov, Ł. Jędrzejewski, P. Klonowicz, G. Żywica, P. Lampart, A. Rusanov
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_10.pdf/No. 133, 2016, 145–162
  2. Resonant characteristics of flow pulsation in pipes due to swept sine constraint
    Tomasz Pałczyński
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_9.pdf/No. 133, 2016, 131–144  
  3. A combined numerical-experimental model of air foil bearing compliant structure
    Jakub Łagodziński, Piotr Zieliński
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_8.pdf/No. 133, 2016, 117–129  
  4. Electric field influence on a height of rise of a dielectric liquid between two parallel electrodes
    Marcin Lackowski, Helena Nowakowska
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_7.pdf/No. 133, 2016, 109–115
  5. Mathematical surge modeling based on the pressure oscillations in the stable operation range of the compressor
    Andrzej Jaeschke, Grzegorz Liśkiewicz
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_6.pdf/No. 133, 2016, 91–108
  6. Compressor modeling using Greitzer model validated by pressure oscillations
    Filip Grapow, Grzegorz Liśkiewicz
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_5.pdf/No. 133, 2016, 69–89
  7. Stable or not stable? Recognizing surge based on the pressure signal
    David Garcia, Grzegorz Liśkiewicz
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_4.pdf/No. 133, 2016, 55–68
  8. An experimental investigation conducted in order to determine bearing dynamic coefficients of two hydrodynamic bearings using impulse responses
    Łukasz Breńkacz, Grzegorz Żywica
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_3.pdf/No. 133, 2016, 39–54
  9. A methodology for online rotor stress monitoring using equivalent Green’s function and steam temperature model
    Mariusz Banaszkiewicz, Krzysztof Dominiczak
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_2.pdf/No. 133, 2016, 13–37
  10. A concept of a test stand for the investigation of a 3D printed turbochargers and selected fluid-flow machinery
    Artur Andrearczyk, Grzegorz Żywica
    http://www.imp.gda.pl/fileadmin/files/transactions/133/133_1.pdf/No. 133, 2016, 3–11
DO GÓRY